Mitigation Monitoring and Reporting Matrix (continued)

Significant Impact Being Mitigated

Mitigation Measure

Responsibility for Implementation

Enforcement Responsibility

Monitoring Responsibility/ Frequency

Actions Indicating Compliance

Land Use and Planning (cont.)

• Policy 337 (phasing schedule for Baylands development) – Either (1) amend the General Plan to include public services and facilities performance standards and concurrency requirements (DSP, DSP-V, CPP, and CPP-V scenarios); or (2) modify the proposed Specific Plan to include an infrastructure phasing program that ties the rate of land development within the Project Site to the availability of needed public services and facilities. (DSP and DSP-V scenarios only)
• Policy 340.1 (demonstration of feasibility of the Geneva Avenue extension and provision of cost estimates with the first specific plan for the Baylands) – Either (1) require preparation of preliminary cost estimates for the Geneva Avenue extension to be completed along with a demonstration of the engineering and financial feasibility of the extension as part of the required Specific Plan (DSP and DSP-V scenarios only), or (2) modify the policy to call for demonstration of the engineering feasibility of the extension along with establishment of the infrastructure phasing program required by General Plan Policy 337 (DSP, DSP-V, CPP, and CPP-V scenarios)

• Policy 374 (Beatty Subarea Land Use) – Modify the policy to accommodate the land uses proposed in the Concept Plan (CPP and CPP-V scenarios only)

Noise and Vibration

Exposure of onsite residential to noise levels in excess of City standards.

DSP and DSP- scenarios

4.J-1a: All residential development within the Project Site shall minimize the exposure of people within the Project Site to noise from Caltrain operations through construction of noise barriers or maintenance of buffer distances, and shall adhere to the following noise performance standards:

• Exterior noise level of below 65 dBA, DNL for outdoor common areas within any approved residential use; and
• Interior noise standard of 45 dBA, DNL.

·

Applicant(s) for residential development shall provide a noise analysis prepared by an acoustical professional verifying that the performance standards set forth in Mitigation Measure 4.J-1a will be achieved.

City of Brisbane Building Official

Prior to issuing any building permit(s) for residential development, the City Building Official shall review the noise analysis prepared for the applicant by an acoustical professional to ensure that the performance standards set forth in Mitigation Measure 4.J-1a will be achieved.

Issuance of building permit(s) for residential development in compliance with Mitigation Measure 4.J- 1a.